Cnrautoparts

About Us

Performance Exhaust Systems & Parts

Federal Catalytic Converters are not legal for sale, installation or use in the state of California. It should be noted that a split system will often provide an aggressive noise increase, and some designs will split the two pipes to opposite sides of the vehicle. If you are looking to save a little money but still get most of the benefits of a cat back exhaust system, however, aluminized steel may be the way to go. Made from traditional steel that’s been coated on all sides with aluminum-silicon alloy, these systems are very strong thanks to the metallurgical bond which still provides a level of corrosion resistance. While the aluminum coating reflects heat well, the steel can corrode if the aluminum layer is chipped or scraped off. Most cat-back systems will come in either an aluminized or stainless steel version.

They both improve your engine’s tone and give it that deep rumble loved by every motor enthusiast. Getting a cat-back exhaust system is definitely the more budget-friendly option. Other benefits of aluminized steel is they are lightweight and very workable.

Considering cat-back exhausts replace more restrictions, they typically offer increased performance and noise compared to axle-back systems; however, they’re also more complicated to install…and more expensive. Every gear head is always looking to upgrade their car’s performance, sound, and look. One quick solution to all three of these aspects is a cat back exhaust system. A cat back exhaust is an exhaust system modification that increases airflow and look. “Cat back” refers to the parts of the exhaust system behind the catalytic converter (where the “cat” in the name comes from).

Because the engine won’t generate as much fumes and doesn’t need to work as hard to eliminate or minimize the fumes, your car will run better, saving you mileage. A benefit like this will improve the longevity of your car and even save you money at the gas pump. At Bradley’s Auto Service in Red Bank, NJ, we can build a completely custom exhaust system for your vehicle, including cat-backs. We will work with you to create your exhaust exactly the way you want it, with any combination of look, sound, feel, power, or muffler at your fingertips.

At Euro Car Parts, we have exhaust parts to help you do just that. It is important to note that the fuel saving will be more noticeable when traveling at freeway speeds than city driving, but if you spend a lot of your day on the road, you’ll likely notice the difference. View our technical tips to help you install, learn about and maintain your exhaust system the right way.

The difference is that the dual exhaust system has two exhaust systems on one vehicle. Meaning, when modifying your exhaust, never start from the front of your turbocharged vehicle with a downpipe or with headers on your naturally-aspirated platform, you will create a bottleneck in the flow. By starting with a cat-back first, your exhaust gases will flow more freely if the rest of your system is stock.

Because the success of a catback exhaust system depends on various factors – like catalytic converter restrictions, engine power, etc. – there’s no easy way to calculate how much horsepower you stand to gain. If you have a restrictive exhaust, then a cat back exhaust could massively improve your car’s performance, and contrastingly, if your exhaust already flows well, then a cat-back won’t be much of an upgrade. In Colorado, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information.

Installation was super easy, and did it myself with only ramps. When IE claims ‘no-drone’ they really mean it – the sound is perfect! The youtube videos do not do a good job capturing the sound quality, but trust me, it’s the best overall setup for your car at a reasonable price point. Enjoy a tuned and enjoyable exhaust note without any raspy leaks ruining the show. Our exhaust system assembles with our wide-width stretch clamps designed to seal and pull your exhaust connections together.

It’s more than our precision-fit or full engine-to-tailpipe product offering, Walker sets the standards. From mild rumble to wild roar, upgrading your exhaust will improve the sound of your truck and help it to stand out from the pack. This direct-fit SPEQ Series system bolts on to your Tacoma easily thanks to the extensive use of 3D scanning during development to ensure OEM-like fitment.

Choose ARK and you will not be disappointed with the sound and quality of our products. Installing a catback exhaust system is a relatively easy task. However, it is important to follow the instructions that come with the system. If you are not comfortable installing the system yourself, you can take it to a qualified mechanic. Get an exclusive inside look at what we are doing on a daily basis with Banks’ Insider News.

Shopping for exhaust can be intimidating, from figuring out your end goal — sound or power increase — to determining the exhaust type you need to achieve it. In this article, we’ll focus on cat-back exhaust and explain what it means, what’s included, and why you’d want it for your truck. All 2000 model year and earlier vehicles or any model year vehicle that was manufactured with EPA or Federal emissions non 50-State certification. All 2001 model year and newer vehicles that were manufactured with California or 50-State emissions certification. Our ASE Certified technicians are the best when it comes to the installation of Banks performance products. The 19″ Y-spoke alloy wheels were sourced from a Cadillac CTS-V and are mounted with Continental ExtremeContact tires.

The precious metals inside the converter, including platinum, palladium, and rhodium, are extracted. Ford Motor Company and Shelby American collaborated to create a stunning high performance concept vehicle based on the exciting and innovative Ford Mustang Mach-E GT platform. The big block Shelby Cobra is considered by many to be the most iconic American sports car in history. When GM began to work on a new big block Corvette and Ferrari increased the power of the V12 powered GTO’s, Shelby and Ford Motor Company decided to shoehorn the mighty 427 FE motor into the Cobra. By combining Ford’s incredible 6.7-liter Power Stroke® turbo diesel churning out 1,050 lb.-ft. Of torque with a Shelby tuned advanced off-road suspension system, the three-quarter ton truck delivers both serious off-road capabilities with best-in-class towing.

At Thermal R&D Performance, we have been developing quality aftermarket exhaust systems for decades. The materials we use are generally an upgrade from OE metals, and we incorporate our True Helmholtz Technology to eliminate cabin drone. This eliminates unwanted sound without restricting airflow needed for improved performance. Some three-way catalytic converter systems have air injection systems with the air injected between the first (NOx reduction) and second (HC and CO oxidation) stages of the converter. As in two-way converters, this injected air provides oxygen for the oxidation reactions.

In this article, we’ll explain what a catback exhaust system is, what it does, and why it’s different from your run-of-the-mill exhaust systems. There are seemingly endless available upgrades when looking to enhance vehicle performance. It certainly rings true when it comes to your vehicle’s exhaust system. One term that you’ve probably heard if you’re in the market for an aftermarket exhaust upgrades is cat-back exhaust. What exactly does it mean, and how does it change the way your vehicle performs? This 2009 Pontiac G8 GXP is one of approximately 1,830 examples produced, and it has 16k miles.

To make a very long story short so far so good I’m happy with the product. I had 1 dinged tip out of the 4 that prob happened during shipping n y’all already have a new replacement tip on the way so customer service is great as well. Only thing I would change as previously stated would be a little more noise but again that wasn’t my main goal to being with. Hats off to what y’all do and please make more B9 Audi S4 parts n I’ll happily buy them. I regret not buying the IE intake but hey sometimes we all make poor decisions lol. Every vehicle-specific CORSA product is engineered and designed to match the unique properties of the vehicle it is designed for to deliver perfect fitment and performance.

Most end up reducing performance and adding weight, or worse yet – adding cost and doing nothing at all. Find out more about this topic by reading our blog on Why Exhaust Drone Silencers Aren’t All They’re Cracked Up To Be. RealTruck is your home for the best products to outfit your build for unforgettable adventures.

Typically, this includes the pipe connecting the pipe from the catalytic converter to the muffler, the muffler, and the tailpipe or exhaust tips. Because these types of exhaust systems are installed after the emissions monitoring systems of a vehicle, they won’t impede its ability to measure emissions. However, you must be aware of your local noise regulations and adhere to them. With relatively short install times when using a high-quality system from MagnaFlow, exhaust modifications can yield the instant gratification of your ride sounding as fast as it looks. When you purchase an aftermarket exhaust system like a cat-back exhaust, you’re in control of horsepower and sound output as pipe diameter and muffler type are in your hands.

Advanced 3D scanning tools and cutting-edge software provide our engineers with a high-resolution digital model of the Audi B9 S4 chassis. This data is then used to maximize the exhaust size for flow and optimize all available space for the perfect catback fitment. CORSA branded exhaust systems are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. The new exhaust sounds perfect, a marked improvement over stock. It is not too loud – I use the car as a daily driver and drive in capital beltway traffic.

Cat-back exhaust systems will include any pipes that run from the catalytic converter to the muffler, the muffler itself, any pipes that may run from the muffler to the exhaust tips, and the exhaust tips themselves. Some cat-back exhaust systems have a muffler delete, which means no muffler is included. This is typically found on vehicles that function primarily for off-road use; it’s not standard on daily driver vehicles and is even illegal in some states.

Another difference is with the material used in the cat-back exhaust system against that in stock exhaust systems. But the problem with a resonator is that it can cause restriction to the flow of the exhausts. In the end, this can end up lowering your vehicle’s performance. It is also more affordable and easier to install than other types of exhaust systems, including the cat-back exhaust system. Cat-back and axle-back exhaust systems are both aftermarket exhaust systems. A performance exhaust system, like the cat-back exhaust, allows for easy splitting into dual exhaust.

This is a direct drop-in and can be installed at home or at the shop. That’s why we carry a wide lineup of sport exhaust systems, from individual pieces to full kits, made by some of the best manufacturers in the industry. We take exhaust so seriously that we also make our own branded exhaust systems in our own facility. We use 304 stainless steel for extra durability and life, and ensure every component is forged to fit your vehicle. Cat-back exhaust systems have more efficient gas flow, yielding increased engine performance, thanks to their larger exhaust tubes and mandrel bends. As a result, your car will be able to breathe better and produce more power.

Namely, it replaces the rear axle-back and tips and then a portion of what we refer to as the mid-pipes. This system is emissions friendly and doesn’t require any tuning. In New Jersey, vehicles must pass emissions testing to ensure they meet environmental standards. Since cat-back exhaust systems do not modify the catalytic converter or engine management system, they generally do not affect a vehicle’s ability to pass emissions testing.

Installation was easy, and the craftsmanship and welds are very high quality. Mishimoto exhausts are constructed of large diameter mandrel-bent pipes for maximum flow. Mishimoto exhausts are perfectly engineered to provide an aggressively rich tone with no annoying highway drone. In general, though, you can expect to pay anywhere from $1000 upwards for a good cat back exhaust system. That may seem like a lot of money, but keep in mind that a cat back exhaust can provide a significant boost to your car’s performance and help it to stand out from the crowd. Typically a cat-back exhaust upgrade can be swapped with the original exhaust without any modifications.

Less restrictive catalytic converters paired with a cat-back exhaust system will offer high performance and power. Though, the level of horsepower gained is not constant across all cat-back systems. It depends on the quality and performance of the catalytic converters. Because of the better flow of exhausts resulting from the mandrel-bent tubing and the larger diameter piping, cat-back exhaust systems manage to offer better performance. IE offers catback, downpipe, and midpipes upgrades to replace individual sections of your exhaust. Installing variations of these parts allows you to dial in your exhaust volume to your preference, from sporty to aggressive.

Dual Magnaflow wide open mufflers with quad 3.5″ exhaust tips, slightly louder and deeper than standard Borla. This upgrade option retains the large Borla resonator and replaces Borla mufflers with dual Magnaflow mufflers and quad tips. Borla is a great exhaust, but with this upgrade your back will look much better with the large aggressive oval quad tips and will sound better too! Cat-back exhaust systems refer to all of the components that exhaust gasses flow through after exiting the vehicle’s catalytic converter.

CORSA does not recommend or recognize purchases and installations on unspecified vehicles. ARK Performance is a leading manufacture that develops the best cat back exhaust systems, downpipes, test pipes, and hi-flow cats for all car enthusiasts. Using custom designed straight through mufflers for flow – without the noise level of a track car. From a company that’s as committed to your satisfaction as to sonic excellence. A catback exhaust system is a great way to improve the sound, performance, and emissions of your vehicle. If you are looking for a way to improve your vehicle, a catback exhaust system is a great option.

The products of REMUS Innovation Forschungs- und Abgasanlagen Produktions GmbH („REMUS”) are distributed worldwide. This applies equally to products approved in Austria, which are subsequently manipulated, modified, edited or otherwise interfered or changed by the respective buyer, so that it no longer has its original condition. Discover MagnaFlow’s latest evolution in performance exhaust technology. Stainless steel is the most popular choice for cat backs because it is durable and has a deep, throaty sound. But if you’re looking for something lighter weight, you can also find cat backs made out of titanium. So, when it comes time to choose the right cat back for your car, keep these three things in mind and you’ll be sure to find the perfect fit.

Rattling or knocking noises from your vehicle are the most common signs that you need a new exhaust. Any rust on the exhaust can also be a sign that an upgrade is due. When you bid we pre-authorize your credit card for the service fee (this helps prevent fraud). If you win the auction, your card will be charged for the service fee and you pay the seller directly for the vehicle. If you don’t win, your existing pre-authorization will be released.

CORSA exhaust parts, hardware and detailed instructions are included in each kit so you can get on the road as fast as possible. We hope this article has provided a thorough answer to the question of what is a catback exhaust and provided advice on how they can help improve the performance of your car. While they may not provide a big performance boost for all cars, cat-back exhausts are a simple and effective way to improve gas flow in your exhaust system beyond what stock exhausts are capable of. Catalyst poisoning occurs when the catalytic converter is exposed to exhaust containing substances that coat the working surfaces, so that they cannot contact and react with the exhaust. The most notable contaminant is lead, so vehicles equipped with catalytic converters can run only on unleaded fuel.

The bolstered heated front seats and contoured rear bench are upholstered in Onyx and Red leather. Appointments include a Blaupunkt 11-speaker sound system, a CD stereo, cruise control, a leather-wrapped shift lever, and automatic climate control. Whether you’re seeking Upgraded Turbochargers, Axle-Back exhaust systems, Coilovers, or SubiSpeed Headlights we have you covered. The truck is based on the F-150 Lariat 4×4 SuperCrew and Shelby plans to limit production to 800 examples for the 2024 model year. Pricing starts at $130,000 for the naturally aspirated version and $139,995 with the supercharger attached. The urea solution is also referred to as diesel exhaust fluid (DEF).

By running pipes from the catalytic converter to the muffler and from the muffler to the exhaust tip, cat back exhaust systems improve exhaust gas flow, providing small performance boosts. However, your performance gains may be limited if your catalytic converter restricts gas flow, as a catback exhaust system is installed ‘downstream’ of the converter. Header-back systems are increasingly rare, namely because of modern emissions systems. Since removing your vehicle’s factory emissions components is highly illegal, the previous two options are more common. However, header-back systems are still available for some older, pre-emissions applications. In these cases, header-back systems offer more performance and volume than cat-back or axle-back systems; however, they’re also the most expensive and the most challenging to install.

All joints are hand TIG welded using precise fixtures and tooling. We take great pride in knowing your new exhaust will sound remarkable and stand the test of time. Stand out from the crowd with oversized 90mm quad slash-cut exhaust tips. These aggressive-looking tips fill the factory exhaust cutouts for that high-end sporty look. Over 20 years of expertise have cemented TruBendz’s reputation for excellence. Our commitment to high-quality materials and craftsmanship ensures that you get the best bang for your buck.

These two work together to offer better flow and allow the system to breathe better. We are one of few brands that own our factory thus enabling us full control over the manufacturing process, selection of raw materials, and construction techniques. Install your IE catback without any permanent modifications or installation hassles. The installation process is straightforward and accomplished with standard mechanic tools.

The installation of a cat-back exhaust system is fairly easy, but this too depends on your vehicle’s make and model. But, compared to the alternative, they are the easiest way of improving your vehicle’s performance without breaking the bank. As a result, the engine gets to breathe better and so release more torque and horsepower.

They directly bolt on to where the original exhaust sits and do not require any further modification. Cat back exhaust systems come with exhaust pipes, muffler and exhaust tips, so you have everything you need to replace the exhaust. The cat back is the section of the exhaust that runs from the outlet of the catalytic converter to the exhaust tips. Exhaust systems that include this often feature a large pipe running from the converter to the muffler, with mandrel-bent turns and glasspacks for reduced back pressure. Your go-to spot for information on the exhaust system, as well as mufflers, catalytic converters, pipes and sensors.

Not only do our products boost performance and optimize exhaust flow, but we also add a touch of personalization to your ride. Find the perfect performance exhaust system compatible with Ford, 2018 ram 3500 delete kit, Chevy/GMC, Jeep, and more. Our patented design outflows all other exhausts on the market. The CORSA Performance GT350 Active valve exhaust system allows the driver to flexibility of having one exhaust that produces both an Xtreme and a Sport sound level.

Walker is your one-stop exhaust shop, offering a full line of mufflers, pipes, hardware and accessories. Cat to Y pipe intersection showing after cat O2 sensor location. This qualifies as one of the STRANGEST stock exhaust parts I have seen. For some reason Toyota/Lexus decided to weld a straight section of 60mm pipe to the cat outlet flange, angle cut it, weld a 50mm pipe pipe that has its last couple of inches expanded to 60mm and match angle cut. Also note the O2 placement is in the 50mm sections of the Y pipe where the sensor tip takes up a good portion of the available flow area.

Our straight-through brushed-finished mufflers are configurable to your desire, smoothing the exhaust note to a deep growl, without adding restrictions, rasp or drone. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. A cast 3″ to dual 2.5″ rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system, while looking tidy from under the rear bumper. Finally, removable 4″ polished slash-cut exhaust tips finish the system, adding a classy motorsport-inspired touch to the rear of the vehicle. In addition to high-quality materials and components, the design of each high-performance exhaust system allows for easy, bolt-on installation right out of the box. CORSA exhausts require no welding and can mount directly to your factory connections.

By freeing up the restrictions in the exhaust system, a cat back exhaust can help your engine to breathe more freely. This, in turn, can lead to a significant increase in horsepower. If you love cars just as much as we do, then you know that one of the best upgrades you can make to your vehicle is a cat back exhaust. But if you’re not familiar with this term, don’t worry – Vandemon Performance is here to break it down.

We want to make sure the part fits your specific vehicle so we need a little more information from you. You can find out by inspecting the emissions sticker that is located in your engine compartment.

Most designs of the time therefore included secondary air injection, which injected air into the exhaust stream. This increased the available oxygen, allowing the catalyst to function as intended. Cat-back exhaust systems replace every component behind the catalytic converter, including most piping, mufflers, resonators, and tailpipes.

Exhaust systems also play a role in reducing noise levels, improving engine performance and reducing fuel consumption. To get the power level up to 785 hp, Shelby installs a Ford Performance supercharger, as well as a new carbon-fiber air intake tube, high-performance fuel injectors, and an aluminum heat exchanger. A Borla (cat-back) exhaust system rounds out the list of powertrain modifications.

The cat back system’s pipes have a larger diameter than a standard set. So, your vehicle will get to perform better at a fraction of the work it outputs. An axle-back exhaust system will replace the components from the rear-axle back. While axle-back CORSA exhausts will provide some slight performance gains, their primary focus is to influence your exhaust notes. Different axle-back exhausts will offer different exhaust notes, so it’s best to browse our entire selection to find the sound most suited for your vehicle.

There is a range of muffler types you can choose from with a cat back exhaust system with most people opting for a glasspack or straight-through muffler. Both of these options are designed to work well within the system to reduce back pressure. Deciding to purchase a performance exhaust system for your car is no easy task.

You can also add other upgrades to give your Charger an extra performance boost. Visit the AmericanMuscle headers and exhaust accessories pages to find parts that fit your new cat back system. Mishimoto offers a wide selection of exhaust systems, including cat-back exhausts, performance exhaust systems, and aftermarket exhaust options, designed to enhance your vehicle’s performance, sound, and style. Our exhaust systems are engineered with precision and constructed using high-quality materials to deliver improved exhaust flow, increased horsepower, and an enhanced driving experience. Enhance the sound and performance of your Subaru with our premium cat back exhaust systems. Designed to replace the factory exhaust system from the catalytic converter rearward, these cat back exhausts offer a deeper, more aggressive exhaust note while reducing restriction for improved airflow.

Check out our cat back exhaust category and you’ll find systems that are built from stainless or aluminized steel. They also come in different tubing diameters to deliver varying ranges of exhaust volumes. Some of our exhaust kits even come with resilient powder coatings, so you can get an upgrade that matches your Charger’s appearance. Thanks to the large selection of products at AmericanMuscle, you can definitely purchase a cat back exhaust that can bring out your vehicle’s true high-performance potential.

Video Features Options Short video of our 3″ Catback Exhaust for the 07+ Honda Civic Si Sedan. Note that this was installed on a naturally aspirated setup (stock header and… Already own an Ultimate Racing Performance Muffler and want to upgrade to a full Catback system. For information about our other auto repair services, please refer to our comprehensive guide. But both cons of a resonator are not present with a cat-back exhaust system. For the noises that the muffler fails to get rid of, the resonator eliminates them. As a result, they are fitted with both a muffler and a resonator.

Decades later, Gale and the team are not only innovating, patenting products, and setting the bar for aftermarket performance manufacturers, we’re also sharing our secrets with the world. The 6.2-liter LS3 V8 was factory rated at 415 horsepower and 415 lb-ft of torque. It is used to expel harmful gases and substances from your engine; without it, the car could experience a build-up of fumes.

All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market. Our catback design includes all sections to replace the factory exhaust tips, mufflers, and resonator up to the midpipes. Enjoy an unrestricted system that delivers the perfect exhaust note from your turbocharged V6 engine. A catback exhaust system replaces the muffler and tailpipe with a more free-flowing design. This allows the exhaust gases to flow more easily out of the engine, which can improve the sound and performance of the vehicle.

The purchasers are entirely responsible for informing themselves of applicable California laws and to comply with those laws. Mishimoto exhaust systems are designed for a bolt-in installation. From classic American muscle cars to the newest off-road capable rigs, we’ve got you covered. Browse our most popular performance car, truck and SUV exhaust systems to find the ultimate exhaust experience for your ride.

The new Large Bore-HD exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4″ stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT’s. This system is available in 4″ cat-back with muffler. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. For over 40 years, MagnaFlow has maintained its position at the forefront of high-end catalytic converter and performance exhaust manufacturing. MagnaFlow stands by its products with industry-leading warranties in service of its mission to provide the highest quality exhaust experience from start to finish.

Cat-back exhaust systems replace all the components after the catalytic converter, sometimes referred to as the cat. Now you can upgrade your downpipe or mid-pipe depending on your applications. Some cat-back systems will include a mid-pipe depending on your cat layout. And when you want to make more power and take your vehicle to the next level, then you will be ready for an exhaust manifold. Available only from Mallett Performance Cars, this exhaust system is made from 304 stainless steel and features the highest quality mufflers and resonators.

Make sure your Subaru, 2004 nissan titan headers, Honda, or Toyota is outfitted with a top notch exhaust system from Racing Exhaust System. Some are ideal for normal vehicles while others are better for high-performance engines. Products manufactured by REMUS without (EC-)approval are only eligible for usage at motor sport events or tests within the meaning of KFG 1967.

There are loads of options, all offering different benefits, and the amount of research you do can quickly turn to frustration when you realise the minuscule differences between the many options. OE-quality exhaust products engineered for today’s medium-duty and heavy-duty vehicles. The single 60mm is split into twin 50mm pipes to the twin silencers.

An upstream air injection point, ahead of the catalytic converter, is also sometimes present to provide additional oxygen only during the engine warm up period. This causes unburned fuel to ignite in the exhaust tract, thereby preventing it reaching the catalytic converter at all. This technique reduces the engine runtime needed for the catalytic converter to reach its “light-off” or operating temperature. Many vehicles have a close-coupled catalytic converter located near the engine’s exhaust manifold. The converter heats up quickly, due to its exposure to the very hot exhaust gases, enabling it to reduce undesirable emissions during the engine warm-up period.

Unwanted reactions result in the formation of hydrogen sulfide and ammonia, which poison catalysts. Nickel or manganese is sometimes added to the washcoat to limit hydrogen-sulfide emissions.[citation needed] Sulfur-free or low-sulfur fuels eliminate or minimize problems with hydrogen sulfide. It also boasts the ultimate in customization, including the optional 700+ horsepower Shelby GT S/C version.

Your engine’s performance and acceleration are then increased. The mandrel-bent tubing reduces the level of back pressure in the exhaust manifold as the larger diameter reduces restriction to the flow of exhausts. REMARK is an exhaust system manufacturer specializing in producing high quality, hand crafted exhaust components and systems for a range of vehicles. All products are made from 304L “Aircraft” Grade stainless steel. Milltek’s 3.15″ (80.00mm) Sport Catback Exhaust System has multiple tip options in Polished, Cerakoke Black, Brushed Titanium, Burnt Titanium and Carbon fiber. You get the only the best with SPD’s 3″ resonator 2016 dodge cummins delete kit pipes. These 304 stainless steel pipes are ..

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. With additional power from idle to redline, we’ve carefully tuned this bad boy to free up power without the annoying drone that often comes in V6 exhaust. Explore further with higher exhaust clearance and experience the sound of adventure.

Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe   Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through… Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

It is called a “catback” system because it starts at the catalytic converter, which is located in the middle of the exhaust system, and continues to the tailpipe. With an aftermarket performance exhaust system from CORSA, you’ll be able to lose yourself in rich, deep exhaust notes you can feel in your chest with every drive. It doesn’t matter if you’re behind the wheel of a BMW, Charger, F-150 or Wrangler, you can choose from our sport, touring or extreme sound level performance exhaust systems for the sound that suits your tastes best. By allowing your engine to run more efficiently, a cat back exhaust can help you to save money at the pump. As an added bonus, cat back exhaust systems often produce a deep and throaty sound that many car enthusiasts find appealing. Cat-back systems usually have the option or glasspack or straight-through mufflers, which are designed to work with the other system components to reduce back pressure.

Since 2003, we have specialized in building BMW M-models (and Tesla) with a refined selection of industry-leading, high quality products. Our 8,000 sq/ft installation facility and shipping headquarters is located in Anaheim, California. IE’s advanced DroneTrap technology captures the pulse waves responsible for your B9 3.0T engine’s exhaust note and draws them into dual mathematically tuned resonators. The internal ports are engineered to resonate these waves against each other in a process that selectively cancels out those responsible for annoying drones.

That means a full exhaust system is a one-way ticket to overtaking cars on the road with ease, fewer trips to the gas station and more power behind your acceleration for when you need it the most. Discover the true power a high-performance exhaust system can bring to your truck or car with CORSA PERFORMANCE. CORSA has remained a leader in aftermarket performance exhaust systems through advanced engineering and constant innovation for over 25 years. Each CORSA exhaust utilizes our patented Reflective Sound Cancellation® (RSC®) Technology and top-of-the-line materials for a truly aggressive sound without any annoying drone during cruise. Enhance your driving experience and see what sets us apart from the competition with a CORSA axle-back or cat-back exhaust system today. Adding a cat back exhaust system is a great way to increase horsepower and improve sound for your vehicle.

However, it’s always a good idea to consult with professional mechanics like the crew at Bradley’s Auto Service to make sure everything checks out. As a vital touch point to the driving experience there is something truly special about dropping a gear and hearing the roar as you disappear. We fear most the time when we are enveloped in silence in our electric bubbles. Our mission forever more is to push off that date and engineer, design, and manufacture the world’s greatest exhaust systems, so that you will always be able to enjoy your car to the fullest.

From the inception of the small block Cobra, Carroll Shelby intended to build a race version of his lightweight roadster; its ultimate iteration was the 289 FIA roadster. Special Edition Shelby F-150 Super Snake celebrates Carroll Shelby’s passion for performance trucks. Shelby American is celebrating the 100th anniversary of Carroll Shelby’s birth with a performance street truck to honor the ledged.

Each cat-back exhaust system is made from high quality components and assembly so you can get the performance you want at a price you can afford with the assurance you need. Please note Quad Tips are available with optional Carbon RR Racing Tips! (see photo of our new tips in the image library for this product)This is our signature full cat-back exhaust system for Lexus ISF.

The APR Catback Exhaust System personalizes your vehicle’s looks, sound and performance. You get the only the best with SPD’s 3″ resonator delete pipes. These 304 Stainless Steel pipes are .. SPD’s high performance stage 1 resonator cat-back pipe replaces your factory resonator pipe with a t..

And for early access to special offers on the products you love, add Banks Special Offers. In a world of companies making disparate parts, Banks engineers the entire engine, not just its components. The proof of Banks’ expertise is its list of national championships and world records as well as the biggest military engine contract of the century. Of all the possible options, the U.S. military chose the Banks D866T engine for its high performance and durability.

From Overland Series to our all-new SPEQ Series, explore MagnaFlow’s latest performance exhaust systems designed for the 2024 Toyota Tacoma. Aftermarket cat-back exhaust upgrades are a relatively simple way to increase your vehicle’s power. Typically these upgrades involve installing wider piping with fewer sharp or sudden bends as a way to reduce backpressure. Backpressure is pressure opposing the desired flow of exhaust gasses. The more you are able to reduce backpressure, the more efficient the system will be, and ultimately your horsepower will increase. Cat-back exhaust refers to any part of the exhaust system that’s behind the catalytic converter.

The first widespread introduction of catalytic converters was in the United States automobile market. The exhaust system is crucial to a car’s performance, especially the catalytic converter which can go bad if it’s overworked. A stock exhaust system strives to minimize the car’s materials while maximizing space. This means that the exhaust system’s performance can suffer, having to work harder with less horsepower.

I do live in a residential community and want to keep things civil with my neighbors…so I went with the resonated/muffled setup. Orders of $299.99 or more ship free within the continental U.S.Shipping to Alaska and Hawaii is additional and not included.We do not ship international at this time. Enter your email address above, to be notified of new products released. Sign up to our newsletter and stay up to date on all the latest news, products and events.

This style of clamp design is popular in high-end OE applications and is known for long-term reliability. You can change the look of your Jeep too, with everything from polished stainless steel to full black exhaust kits, you can pick just the right look for your jeep. Depending on the year of your Jeep you might even be able to get a single or dual exit exhaust. You can choose your favorite exhaust system from our three collections, the GRiP Exhaust, N-II Exhaust, or the DT-S Exhaust.

We use the latest, advanced equipment to ensure precise and accurate adjustments. Each of the trucks will be included in Shelby’s official registry. Revology’s ’68 Shelby GT500KR surpasses the performance of the original with a 710hp supercharged Ford/Roush Performance 5.0L Ti-VCT Coyote DOHC V8 engine. In 1962 Carroll Shelby, one of America’s greatest race car drivers began a new chapter in his storied career with the legendary Cobra sports car. A piece of of this sports car’s “DNA” is part of every subsequent Shelby vehicle.

A cat-back exhaust system is one of the best ways to improve your car’s performance. It replaces the stock cat-back exhaust system and gives your car a more aggressive sound. Perhaps the most significant benefit is the increased power that it can provide.

Invidia offers products known for their outstanding quality, and each finished piece is a work of art that sets them apart from the competition. For anyone looking to take their vehicle to the next level, Invidia is a name to remember. So, a cat back is used to indicate an upgrade to the stock exhaust system. And anyone looking to improve their ride should strongly consider a cat back exhaust system. This pipe will connect your mk1 downpipe that we sell for  1.8t, vr6, or aba 2.0, to the catback exhaust system. Therefore you need to check with your local state laws for legality.

A faulty exhaust system can cause a decrease in power, acceleration and fuel efficiency, as well as potentially exposing drivers and passengers to harmful gases, so issues should be fixed immediately. We have a wide range of exhaust systems in stock – browse our range and find the correct exhaust system for your car below. There are many distinct and differentiable features to each of many cat back exhaust systems, meaning it’ll be easys to find a do-it-yourself cat back installation. The modifications directly bolt where the original exhaust is, so there won’t need to be excessive installation. You’ll have everything you need to replace the exhaust with the pipes, muffler, and tips that come with a DIY package.